Handlebars Archive

For low cockpit purests the Turbine flat bar with 5-Degree back sweep will keep you on track for epic climbs without weighing you down (170g).

2in. taller than current +2in. Sweeper bars. The throttle grip end is notched and the bar is milled for internal wiring to accommodate the electronic throttle control sensor unit (can also be used on pre-2008 models). Cable changes may be required; wire extension for the ETC may or may not be needed. Dimpled, knurled and available in duplex nickel chrome plated or gloss black finish. Made in the USA. End Rise: 13.53in. Width: 31.77in. Center Width: 12in. Pullback: 7.64in.This item fits the following models: 2008 – 2009 Harley Davidson FLHT Electra Glide Standard2008 – 2013 Harley Davidson FLHTC Electra Glide Classic2008 – 2013 Harley Davidson FLHTCU Electra Glide Ultra Classic2009 – 2013 Harley Davidson FLHTCUTG Tri Glide Ultra Classic2010 – 2013 Harley Davidson FLHTK Electra Glide Ultra Limited2008 – 2013 Harley Davidson FLHX Street Glide2010 – 2011 Harley Davidson FLHXXX Street Glide Trike

The most impressive attributes are the strength, stiffness and durability. Easton’s classic handlebar geometry-9-degree sweep and 5-degree upsweep-puts your hands in the perfect positions for attacking the trail and the low, 20-millimeter rise complements the tall front-ends of modern trail bikes.

Regardless of its renowned homage to carbon, Zipp realizes that aluminum is far from an outdated material. Whether you prefer it for peace of mind in the heat of the sprint or find the slight weight difference an easy way to keep your ultra-light bike above legal weight limits for your Cat 1 debut, the Zipp Service Course SL Ergo Handlebar showcases the best of aluminum’s qualities — strength, low weight, and relatively low cost. The Zipp SL Ergo handlebars are the replacement for the Zipp CSL bars. They were designed with Zipp’s SSR (Super Short Reach) dimensions — a 70mm reach means that it is easier for riders with shorter arms and smaller hands to reach the shifters while in the drops. These dimensions are the same as the SL-70 — the primary difference is that the tops of the SL Ergo bars have been sculpted flat to provide a substantial platform for your hands during long climbs. The cables tuck nicely underneath. The drop angle of the bars is only 20 degrees. This allows you to position your levers in the ‘high-and-Belgian’ style or in the flat-top neo-pro style without having to rotate your bars skyward. The drops have a 2 degree outward bend for more wrist comfort, which also minimizes bruised forearms while sprinting. The Zipp Service Course SL Ergo Handlebars are available in 2cm increments from 38cm-44cm measured center to center, and each pair of bars fits a 31. 8mm stem. They come in two colors: Polished Black, a high gloss finish with white logos, or Beyond Black, a matte black with etched logos for a stealthy look.

New compact bar end size for the GS series. The compact 2 finger bar end is made out of robust glass fiber reinforced composite, with an anti-slip rubber grip. Offering an extra hand position for increased leverage and comfort. Compatible with carbon hand.

Small footprint armrest and minimlist pad dedsigned specifically for TT usage.

Distributed Stress and Top Lock Technologies optimize bar/stem interface by removing stress risers and eliminating rocking caused by floating face plates. If you’ve got a Haven bar, this stem is the perfect match.

Who says strength and performance have to be mutually exclusive? Certainly not us. The Race Face Evolve mountain bike stem is a great combination of strength and durability and race-oriented performance. The 6061 aluminum alloy is forged and blasted to take all the abuse the trails can dish out, while still being lightweight and stiff enough to ensure that it’ll deliver the goods come race day. Strong, stiff and durable forged 6061 aluminum alloy construction Four bolt face plate help evenly distribute stresses Interlocking U-shape handlebar clamp holds the handlebars securely +/- 6° rise so you can adjust the handlebar height to your preference 160 grams light

• Innovative design for the discriminate bike builder that requires an extreme alternative• These Chubby Apes are 1-1/4″ thick, with finely tuned precision bends for maximum control and comfort• Welds on this bar are polished smooth then given a show chrome finish• Fits models with 3-1/2″ center to center risers• You must use a full one piece riser clamp to secure these bars• When installing taller, larger diameter bars we re comment also replacing your stock rubber riser bushings with a firmer, more rigid heavy duty urethane bushing set 5000196 or 5000195

The new GR2 BioKork offers a different feel thanks to the use of natural cork, while offering all the ergonomic advantages of every Ergon Performance Comfort Series grip. The 3 finger angle adjustable bar end offers an additional hand position, and non-slip rubber inserts for a sure grip in all conditions.